Balboa GS100 2.0kW with VL401 touch pad – 1 pump no air


Available on back-order

SKU: SPPKBL-GS1-V41P01 Category: Tags: , ,


Balboa GS100 2.0kW with VL401 touch pad – 1 pump no air
Type of product: Balboa electronic control pack with paired topside control
Make and model: Balboa GS100 control box and Balboa VL401 topside control
Power: Volts: 230vac
Hz: 50
KW: 2
Specification: Pump 1: Dual speed pump 1
Air Blower: N/A
Heater: x 1 2kW, Heater is a separate unit which plugs onto the board.
Ozone: x 1 (230vac)
Light: x1 12 volt
Radio, TV/AV: Point available
Compatible with: Any retrofit system, suitable for upgrades
Connections: 1.5 inch socket heater union sleeves. Amp cables plug onto the PCB to operate the components.
Dimensions of Box: (L) 215mm x (H) 133mm x (D) 73mm
Length of heater with unions is 375mm
Dimensions of Topside: 160mm x 57mm
Topside buttons: BLOWER, JETS, TEMP and LIGHT
Additional notes:
The M7 technology means you do not need to have sensors and flow switches going back in to the tub as everything is done in side the control box by 2 sensors.
*FREE CABLE PACK* this includes…
1 x 4 pin cable (2 speed pump)
1 x 3 pin cable (1 speed pump, blower or ozone)
1 x 2 pin cable (Spa light)
*if you want to the topside with three buttons (Jets, Temp & Light you will need to order this seperately) you will need to order seperately , the part number is OL-40131.
If your system has a circulation pump as well as a separate boost pump you will need to buy another 1 x 3 pin cable.
As this is only a 2.0kW system this makes it a useful entry level system. The heater only draws around 8.5amps so if the system is designed to do so, you could have a small combined system running from a domestic 13amp supply. You must always consult a qualified electrician for accurate information prior to installation.